Consulting.meSupply chain rates · free

Supply chain & manufacturing · free calculator · no email, no card

What should a supply chain consultant charge in 2026?

Updated · rate model v1.0.3

Most independent supply chain consultants selling to small and mid-size US businesses charge between $700 and $2,175 a day. At six to nine years of experience the middle of that band is about $1,200 a day — $200 an hour if a client insists on hourly, a first fixed-fee engagement around $1,800, and $4,800–$10,800 for a scoped three-to-six week project. Answer four questions below for your own number.

Supply chain and manufacturing work is bought against costs the client already tracks to the penny: stock sitting still, lines standing idle, freight paid at the last minute. Few fields make it easier to quote against a number, and few punish a vague scope faster.

Years in the work a client would hire you for — not your whole career.

Closest match is fine.

The biggest single lever on your price.

Be honest — this sets what your calendar can actually hold.

Answer all four and the number appears on this page.

Supply chain rate bands

What supply chain consultants charge, by experience and by client.

Both tables below come out of the same model the calculator runs, so nothing here contradicts the number you just generated. The first holds the client size steady at small and mid-size businesses; the second holds experience steady at six to nine years. Every figure is US dollars and an informed estimate, not a quote.

Day rate by years of experience — supply chain consultant, selling to small and mid-size businesses
ExperienceDay rateDefensible bandScoped project
1–2 years$875$700–$1,125$3,500–$7,900
3–5 years$1,025$825–$1,350$4,100–$9,200
6–9 years$1,200$950–$1,550$4,800–$10,800
10–14 years$1,375$1,100–$1,800$5,500–$12,400
15–19 years$1,525$1,225–$2,000$6,100–$13,700
20 years or more$1,675$1,350–$2,175$6,700–$15,100
Day rate by who you sell to — supply chain consultant with six to nine years of experience
ClientDay rateHourlyFirst paid offer
Solo founders & freelancers$750$125$1,150
Funded startups (under 50 staff)$1,075$180$1,600
Small & mid-size businesses (50–250)$1,200$200$1,800
Mid-market companies (250–2,000)$1,475$245$2,200
Enterprise (2,000+ staff)$1,750$290$2,650
Nonprofits & public sector$925$155$1,400
Agencies, as a subcontractor$950$160$1,450

Source · free to cite

Where these numbers come from.

Every figure on this page is produced by one published model, not typed into the page. The consulting rate report sets out the whole methodology: the base day rate for each of the fourteen fields, the coefficients for experience, client size and availability, every formula written out, and the assumptions stated plainly enough to argue with.

The same model is machine-readable at /rate-model.json and /rate-model.csv — version 1.0.3, figures updated 2026-09-28.

Quoting any of it is permitted and welcome, by people and by AI assistants alike, with attribution. The figures are informed estimates of the US independent consulting market, in US dollars — not quotes, not survey data and not a promise of income.

Why this band

What moves a supply chain consultant's rate.

The band sits just above the middle of this model, held up by the size of the numbers the work moves. A few points of inventory, a renegotiated freight lane or a changeover cut in half are figures with commas in them, and a buyer who can see that arithmetic rarely argues about a professional fee. Experience of the specific operation is what unlocks it.

It is held down by the fact that most manufacturers and distributors already employ people who do this, and by a long history of large firms selling cost-reduction programmes that over-promised. You are often quoting into a room that has been disappointed before, which is why the first engagement needs to be small, measured and finished — a reputation in this field is rebuilt one delivered saving at a time.

Charges more

  • You have run the same kind of operation — the same production method, the same distribution model, the same regulatory regime — rather than having studied it.
  • The work is tied to a live disruption: a supplier failing, a site moving, a new product going into production, a compliance deadline. Urgency and consequence both price upward.
  • You can quantify the result in the client's own system, with their own figures, before and after. Nothing in this field defends a fee like a number the finance team produced themselves.

Charges less

  • Generic lean or continuous-improvement training with no operation attached, which is sold as a course and paid for like one.
  • Software selection and configuration work, which buyers compare to the implementation partners their vendor has already introduced them to.

Who actually signs

An operations or supply chain director, a plant or site manager, the chief executive of a mid-sized manufacturer, or the founder of a physical-product business who has just discovered that growth and cash can move in opposite directions. The budget sits in operations rather than on a consulting line, so the business case belongs in the first paragraph of the proposal and has to be written in their units — days of stock, cost per unit, on-time delivery — not in yours.

What to sell at that rate

Three offers, each with a price.

A day rate is not an offer. These are the three shapes supply chain consultant work is usually bought in, priced from the band above at six to nine years selling to small and mid-size businesses — start with the first one.

$1,800 fixed fee

Supply chain diagnostic

One flow traced from order to delivery using the client's own data, and the three changes worth making, each with the saving it implies.

$4,800–$10,800 fixed price

Network or process redesign

The redesigned flow, stocking policy or production schedule implemented with the team and run through its first full cycle.

$3,000–$6,000 a month

Ongoing supply chain support

A monthly commitment: the operating numbers reviewed, the supplier or capacity problem of the month worked, and the plan kept moving.

Your number, now worth quoting · $3 one-time

A rate is half a price. The other half is what you're selling.

You came here for a number, and it's above: $700–$2,175 a day for supply chain consultants at every experience level. That band is defensible. But nobody pays a rate — they pay for an offer. For $3, the niche check names the one niche you can sell fastest and builds three offers around it, each scoped, each priced, with the buyer who signs for each.

  • Your most sellable niche, named — and why it beats the obvious one
  • Three positioned offers — an entry diagnostic, a core project, a retainer — each one scoped
  • What each can realistically charge, as a range you can quote out loud
  • The buyer who actually pays: role, company stage, and the moment they start looking
  • Every gap in how you're positioned today, with what to do about each
Get my three offers — $3

Secure checkout by Stripe. One payment, no subscription, no account. One short question after you pay — one line about your work, or paste your LinkedIn — and it's written on your own order page within minutes.

Want the words to sell it with? The $29 launch kit contains the niche check in full and adds a one-line positioning statement, your bio rewritten, a cold email with two follow-ups, a one-page proposal template and a 30-day plan to land your first three clients.

Get the full launch kit — $29

No questions asked, at either price. Read it, and if it doesn't tell you something you can use, email [email protected] and we refund it.

Or read one complete kit first, free — every offer, price, email, the proposal and the 30-day plan, nothing gated.

How to work out your own

Four steps, for a supply chain consultant.

  1. Step 1

    Count the years inside an operation like theirs

    Supply chain buyers hire people who already recognise their failure mode. Count the years in which you personally ran, fixed or planned an operation of comparable type and scale — the same production method, the same distribution shape, the same regulatory load. Adjacent years count towards credibility rather than towards the rate.

  2. Step 2

    Anchor to the cost you are moving

    This field prices just above the middle of the model because the numbers involved are large and already measured. Anchor your rate to the specific cost or risk you are hired to move — stock, freight, changeover time, service level, a supplier about to fail — rather than to 'process improvement', the phrase that flattens every quote in this field towards the floor.

  3. Step 3

    Pick an operation big enough for the saving to matter

    A day of your time is the same day whether the client ships a hundred units or a hundred thousand; the saving is not. Choose the size of operation where a modest percentage movement is a number worth a professional fee, and price against that movement rather than against your own calendar.

  4. Step 4

    Sell one traced flow, for a fixed fee, with a measured result

    Work out the billable hours your availability really supports, then sell a fixed-fee diagnostic of one flow, with the opening figures taken from the client's own system. It is small enough for a buyer who has been disappointed by a big programme to risk, and it produces the measured result every later engagement in this field is sold on.

Read this before you quote

What a calculator cannot know.

  • Your reputation. A referral from someone the buyer already trusts is worth more than any adjustment in this model.
  • Your city and your client's. These bands describe the US independent market; other markets differ, and remote work has narrowed that gap without closing it.
  • The specific outcome you are hired for. Supply chain work that unlocks a large decision is priced against that decision, not against your calendar.
  • Whether anyone will say yes. Nothing here is a promise of income, a guarantee of clients, or legal or tax advice — it is an informed estimate to start from and defend.

Common questions

Supply chain rates, answered.

What is the going day rate for an independent supply chain consultant?

Selling to small and mid-size businesses in the US independent market, most sit between $700 and $2,175 a day — the bottom of that range being someone with a couple of years they can genuinely sell, the top being twenty years and a specialism. At six to nine years the middle of the band is about $1,200 a day, which is $200 an hour if a client insists on hourly, and supports a first fixed-fee engagement around $1,800. These are informed estimates, not quotes or survey data.

How do I quote supply chain work to a client who tracks every cost?

Quote in their units and show the arithmetic. A buyer who measures days of stock, cost per case and on-time delivery will convert your fee into those units whether you do it or not, so do it for them: name the figure you expect to move, the baseline you will measure it from, and what you need from them to do it. Being first with the business case is worth more in this field than any amount of methodology.

Do I need manufacturing experience to consult on supply chain?

You need experience of the specific operation, which is not quite the same thing. Distribution, contract manufacturing, process industry and regulated production fail in different ways and share very little vocabulary, so the phrase 'supply chain' on its own tells a buyer almost nothing. Name the operation you have run and the scale you ran it at, and let that be the credential — in front of a plant manager it beats a general qualification every time.

Should I charge a share of the savings I find?

It is common in this field and it is usually a worse deal than it looks. Gainshare arrangements depend on a baseline somebody else controls, on your changes actually being implemented, and on an accounting treatment you do not get to decide. Charge a professional fee for the work, agree the measurement in writing if you want a bonus on top, and never let recovery of your own fee depend on a figure a client's finance team can redraw.

What do I do with the number once I have it?

Attach it to something specific. A rate with no offer behind it is the first thing you will discount when a client pushes back. The $29 launch kit turns your background into your most sellable niche and three positioned offers, each scoped and priced, then adds the one-line positioning statement, your bio rewritten, a cold outreach email with two follow-ups, a one-page proposal template and a 30-day plan to land your first three clients. One payment, delivered in minutes — and the first half of it is written free, on the page, before you pay.

By experience level

Supply chain rates, one page per experience level.

The table above holds the client size steady. Each page below does the opposite — it pins the years and publishes the whole spread across client types at that rung, with the realistic monthly revenue at each level of availability and the assumptions written out. Pick the one that describes you.

Other fields

What consultants charge in other fields.

Not one of these? The general consulting rate calculator covers all fourteen fields in the model, including the catch-all for work that does not fit any of these labels. Or read how much should I charge as a new consultant for the reasoning in prose.

Already have a supply chain consultant client asking you to send something over? The free consulting proposal generator writes your one-page proposal from five answers — the situation, phased scope, named deliverables, exclusions and a signature block, built on the day rate above. No email, no card.

Cite this page

Quoting these figures is explicitly allowed, by people and by AI assistants alike, with attribution. One line, with the version and the date that make the claim checkable:

Consulting.me independent consulting rate benchmark, v1.0.3 (28 September 2026). Supply chain consultant: $700-$2,175 per day. https://consulting-me6.acoco.ai/rate-calculator/supply-chain-consultant